ARMATURE
ROBOTICS
Contact →
Menu
AR / RESEARCHProof before scale

BUILD THE EVIDENCE LADDER.

Armature's research program is organized around one principle: physical capability should advance only when the smaller system beneath it has measurable boundaries, known failure modes, recovery behavior, and evidence strong enough to prove what actually happened.

01 VALIDATION LADDER

SCALE CONSEQUENCE SLOWER THAN CAPABILITY.

The fastest way to build trustworthy physical autonomy is to keep consequence low while iteration is cheap, then expand scope only when the previous layer can explain and survive its own failures.

R&D / VALIDATION LADDERPROOF BEFORE SCALE
Armature research and validation ladderA technical diagram showing capability progressing from simulation through bench testing, single machine work, field validation, fleet coordination, and closed-loop site operation.01SIMULATION02BENCH03MACHINE04FIELD05FLEET06SITELOW CONSEQUENCE / HIGH ITERATIONHIGH CONSEQUENCE / EVIDENCE REQUIREDEvery stage must prove the failure modes introduced by the next one.NO CAPABILITY ADVANCES BECAUSE A DEMO LOOKED GOOD.
ARMATURE / RESEARCH MODEL

Scale only after the smaller system has measurable limits, failure behavior, recovery paths, and evidence that can distinguish success from non-execution.

STATERESEARCHGATEEVIDENCE
A DEMO PROVES THAT SOMETHING CAN HAPPEN. RESEARCH HAS TO PROVE WHEN IT SHOULD NOT.

Autonomous construction is not only a planning problem. It is a boundary-definition problem: what may the system do, under which observations, with what uncertainty, and what evidence is required before the next physical action depends on the result?

02 RESEARCH TRACKS

ONE PHYSICAL SYSTEM. COUPLED RESEARCH PROBLEMS.

The tracks are intentionally coupled. Better machine autonomy is limited by world-model quality; better planning is limited by verification; useful underground infrastructure depends on logistics, serviceability, and machine behavior all working together.

01

World models

Persistent, uncertainty-aware site state connecting geometry, terrain, utilities, materials, machines, work packages, and observed change.

02

Machine autonomy

Perception, planning, control, tool use, and recovery for machines that must move mass safely inside constrained physical environments.

03

Fleet coordination

Shared traffic, work hand-offs, resource scheduling, machine health, and task allocation across unlike equipment classes.

04

Physical verification

Independent evidence that a task produced the intended physical result instead of merely reaching the end of software execution.

05

Material intelligence

Identification, routing, storage, processing, provenance, and reuse of excavated, recovered, and supplied construction material.

06

Machine infrastructure

Corridors, access, charging, communications, safety systems, logistics nodes, and service environments designed around autonomous machines.

07

Cut-face material classification

Identify excavated material at the cut face with explicit confidence and independent reference evidence before downstream routing is allowed to depend on the classification.

08

Evidenced material transfer

Close each material hand-off against independently observed identity, quantity, provenance, source state, and destination state rather than treating dispatch as proof of receipt.

09

Ground + lining response

Measure excavation response, deformation, lining state, and adjacent ground behavior during bounded continuous advance so the system can distinguish expected movement from a changed ground assumption.

10

Module bay fault isolation

Prove that a fault in one module bay can be bounded across utilities, airflow, traffic, material movement, and machine authority without silently transferring the hazard into the network.

11

Atmosphere + occupied-volume ventilation

Develop observable ventilation and atmosphere control through staged unoccupied tests before any occupied sealed volume is permitted to rely on autonomous monitoring or response.

03 PROOF GATES

ADVANCE ONLY WHEN THE CHECK CAN FAIL.

A validation gate is meaningful only if the test can reject a deliberately wrong, absent, stale, or unsafe result. Passing execution alone is not evidence of physical correctness.

A

Simulation gate

The planner and controller must fail visibly against adversarial geometry, stale state, blocked routes, and impossible tasks before field execution is considered.

B

Bench gate

Sensors, compute, communications, actuators, emergency behavior, and state reporting must remain inspectable under controlled failure injection.

C

Single-machine gate

A bounded machine task needs measurable geometry, operating limits, stop conditions, and a repeatable verification path.

D

Field gate

The machine must tolerate real terrain, dust, weather, occlusion, communications loss, changing conditions, and human intervention without hiding uncertainty.

E

Fleet gate

Multiple machines must share right-of-way, task state, hand-offs, and recovery semantics without creating unsafe or ambiguous authority.

F

Site gate

The full loop must connect engineering intent, machine work, logistics, verification, material state, and downstream dependencies into one auditable system.

G

Cut-face classification gate

Pass: independently sampled or otherwise reference-checked material agrees with the system classification inside a predeclared acceptance envelope, while uncertain material is isolated. Reject: materially incorrect classification enters a qualified downstream stream, or uncertainty is hidden instead of changing the routing decision.

H

Material-transfer closure gate

Pass: source and destination evidence agree on the transferred material inside predeclared identity and quantity acceptance rules, with provenance preserved across the hand-off. Reject: the sender reports completion while the destination cannot independently confirm what arrived, how much arrived, or which source state it came from.

I

Ground + lining gate

Pass: independent measurements during a bounded advance keep ground movement and lining response inside the site-specific engineering envelope, and a deliberate or observed excursion causes authority to narrow or stop. Reject: measured response leaves that envelope without the system detecting it, or the model remains nominal while physical measurements disagree.

J

Module-bay isolation gate

Pass: a deliberately introduced test fault is contained to the intended module bay and every crossing dependency reaches a declared, independently observable state while adjacent permitted operations remain inside their own bounds. Reject: the fault propagates, isolation cannot be positively verified, or continued operation depends on an unknown boundary state.

K

Atmosphere + ventilation gate

Pass: staged instrumented tests demonstrate that the candidate occupied volume remains inside its declared atmospheric envelope under tested disturbances, or that an excursion is detected and drives the predefined safe response before occupancy relies on the failed condition. Reject: an unsafe atmosphere can develop without timely detection, the ventilation response cannot bound it, or sensor coverage cannot establish whether the volume is safe.

04 MEASUREMENT

PHYSICAL AI NEEDS PHYSICAL METRICS.

Model quality matters, but the project ultimately has to measure the world the machines changed.

METRIC / GEOMETRYPhysical accuracy

Difference between intended and measured terrain, placement, alignment, grade, volume, or assembled geometry.

METRIC / STATEModel freshness

How current the system's understanding is, where uncertainty exists, and which observations support the state downstream work consumes.

METRIC / AUTONOMYIntervention quality

Not just intervention count: why autonomy yielded, whether it yielded early enough, and whether the recovery path preserved safety and context.

METRIC / SYSTEMClosed-loop yield

The share of work packages that move from plan through execution and positive verification without ambiguous or manually reconstructed state.

RESEARCH ENDS WHEN THE LOOP WORKS IN THE REAL WORLD.

The next useful milestone is not a larger vision statement. It is a smaller autonomous construction loop that can be measured, broken deliberately, recovered, and repeated.

See the development program →